APsystems 406000 APsmart Rapid Shutdown System Transmitter-PLC Dual Core

Description: TRANSMITTER-PLC The APsmart Rapid Shutdown System Transmitter-PLC is part of a rapid shutdown solution when paired with APsmart RSD, a PV module rapid shutdown unit. While powered on, the Transmitter-PLC sends a signal to the RSD units to keep their PV modules connected and supplying energy. RSD units automatically enter rapid shutdown mode when the Transmitter-PLC is switched off and resume energy production when power is restored to the Transmitter-PLC. This solution complies with NEC 690.12 specifications for 2017, 2020&2023 and supports the SunSpec signaling for rapid shutdown. The Transmitter-PLC includes one or two cores and an optional power supply: 85-264VAC for residential, 180-550VAC for commercial. Meets NEC 2017, 2020&2023 (690.12) requirementsSwitching off Transmitter-PLC results in rapidshutdown of the output of PV modulesMeets SunSpec requirementsEquipped with single/dual coreOptional 85-264VAC power supplyOptional 180-550VAC power supply This will be compatible and with build in sensor with the Liniotech 15KVA All-in-One solar Hybrid Inverter 48VDC 120/240/208V. https://www.ebay.com/itm/196374433920 APsmart > Transmitter-PLC for Rapid Shutdown System (RSS) - Single CTMnfg. Part Number: 406001 The APsystems Rapid Shutdown System (RSS) Transmitter-PLC is part of a rapid shutdown solution when paired with APsystems RSD-S-PLC, a PV module rapid shutdown unit. While powered on, the RSS Transmitter sends a signal to the RSD-S-PLC units to keep their PV modules connected and supplying energy. RSD-S-PLC units automatically enter rapid shutdown mode when the RSS Transmitter-PLC is switched off and resume energy production when power is restored to the RSS Transmitter. This solution complies with NEC 690.12 specifications for 2017 and supports the SunSpec signaling for rapid shutdown. SpecificationsModelTransmitter-PLC - Mnfg. Part Number: 406001ManufacturerAPsmartApplicationsRapid Shutdown System (RSS) Transmitter-PLCSafety ComplianceNEC 2017 (690.12); UL1741; CSA C22.2 No.330-17; IEC/EN62109-1; 2PFG2305EMC ComplianceFCC Part15; ICES-003; IEC/EN62109-1/-2/-3/-4Shipping MethodGroundMain Electrical DataInput Voltage12VDCInput Current1ACommunicationPLCPower SupplyResidential ( optional)85-264VAC Input, 12VDC Output, 90mm x 17.5mm x 58.4 mmCommercial (optional)200-500VAC Input, 12VDC Output, 125.2mm x 40mm x 113.5mmMaximum System Voltage1000V /1500VCore DataMax. Current300A (150AX2)Max. System Voltage1500VDCProduct DescriptionAPsmart is a rapid shutdown system that meets Sunspec requirements for module level rapid shutdown. This system meets all NEC rapid shutdown requirements for building mounted solar systems. One RSD-S-PLC unit is installed on each module. This small sized unit easily clips to the edge of the module frame with included clips for a low profile easy to wire, neat install. The RSD-S-PLC units keep a connection between the PV module and string wiring so long as there is a keep alive signal on the power line. The power line signal is supplied by a rapid shutdown PLC transmitter. The operation is simple, if power is supplied to the transmitter they will turn on, if that power is interrupted, they will turn off. This system is compatible with many charge controls or inverters. Some inverters come with a transmitter already installed in it, such as the SMA Sunny Boy inverters. For other inverters and charge controls the TRANSMITTER-PLC can be installed with the PV output cables running through the core. This transmitter is powered by 12 VDC, via output from the inverter (Sol-Ark) or an AC to 12V, or DC to 12V power supply. For rapid shutdown a switch on that power supply is used. There may also be a need for a method to turn off the charge control to effect full rapid shutdown of the PV output cables. A switch on the PV output cables near the inverter or charge control also will initiate rapid shutdown of the PV array. Each RSD-S-PLC unit comes with two MC4 module connectors on 9.8 inch pigtails, and two string series pigtails each 47 inches long with MC4 connectors. Listed to UL1741; CSA C22.2 No.330-17; IEC/EN62109-1; 2PFG2305 FeaturesMeets NEC 2017 (690.12) requirementsProvides heartbeat signal to RSD. Signal stops when AC power is absentMeets SunSpec requirementsEquipped with single/dual core

Price: 48.99 USD

Location: Katy, Texas

End Time: 2024-09-05T16:30:41.000Z

Shipping Cost: 0 USD