Description: The Following Items Are Included: Fluke 1623-2 Earth / Ground Tester Geo (BC# 38774-L/T*) Fluke EI-162AC Inducing Current Transformer Fluke Ei-162X Sensing Current Transformer (3) Fluke Cable reels Fluke 1623/25 Probe Cable Fluke Jumper Cable 1623-2 Quick reference Guide (4) Ground Stakes USB PC Interface Cable User Manual On CD-ROM Carrying Case w/ Strap BE SURE TO CHECK OUR EBAY STORE FOR OTHER ITEMS! This Item Has A Current Calibration! Fluke 1623-2 Earth / Ground Tester Geo KitThe Fluke 1623-2 is a distinctive earth ground tester that can perform all four types of earth ground measurementIncludes Carrying Case & Accessories As Listed Above! Working Condition: ExcellentCondition: RefurbishedCalibrated: YesWarranty: 1 YEAR WARRANTY Fluke 1623-2 GEO Earth Ground TesterStakeless testingThe Fluke 1623-2 and 1625-2 earth ground testers are able to measure earth ground loop resistances using only clamps. With this test method, two clamps are placed around the earth ground rod and each are connected to the tester. No earth ground stakes are used at all. A known, fixed voltage is induced by one clamp and the current is measured using the second clamp. Then the tester automatically determines the resistance of the earth ground rod.This test method only works if a bonded earth ground system exists for the building or structure under test, but most are. If there is only one path to ground, like at many residential applications, the Stakeless method will not provide an acceptable value and the Fall of Potential test method must be used. With Stakeless testing, the earth ground rod does not need to be disconnected—leaving the bonded earth ground system intact during test. Gone are the days of spending time placing and connecting stakes for each earth ground rod on your system— a major time saver. You can also perform earth ground tests in places you’ve not considered before: inside buildings, power pylons, or anywhere you don’t have access to soil.The most complete testersThe Fluke 1623-2 and 1625-2 are distinctive earth ground testers that can perform all four types of earth ground measurement: 3- and 4-Pole Fall of Potential (using stakes) 4-Pole Soil Resistivity testing (using stakes) Selective testing (using 1 clamp and stakes) Stakeless testing (using 2 clamps only) The testers are also easy to use. For each test, the testers inform you which stakes or clamps need to be connected and the large rotary switch can be used even with a gloved hand.Features: 3- and 4-pole Fall of Potential, earth resistance loop testing 4-pole Soil Resistivity testing Selective earth ground rod testing using 1 clamp Stakeless earth ground rod testing using 2 clamps IP56 rated for outdoor use USB data storage and transfer Specifications: General Display:1999 digit LCD Display with special symbols, digit height 25 mm User interface Instant measurement through TURN and START one button concept. The only operating elements are rotary switch and START button Robust, water and dust resistant Instrument is designed for tough environmental conditions (rubber protective cover, IP56) Memory Internal memory storage up to 1500 records accessible via USB port Temperature ranges Operating temperature -10 °C to 50 °C (14 °F to 122 °F) Storage temperature -30 °C to +60 °C (-22 °F to +140 °F) Temperature coefficient ± 0.1 % of reading/°C <18 °C >28 °C Intrinsic error Refers to the reference temperature range and is guaranteed for 1 year Operating error Refers to the operating temperature range and is guaranteed for 1 year Climatic class C1 (IEC 654-1), -5 °C to +45 °C (23° to +115° F), 5 % to 95 % RH Protective type IP56 for case, IP40 for battery door according to EN60529 Safety Protection by double and/or reinforced insulation. max. 50 V to earth. IEC61010-1: 300V CAT II, Pollution degree 2 EMC (Emission Immunity) IEC61326-1: Portable Quality system Developed, designed and manufactured according to DIN ISO 9001 External voltage V ext, max = 24 V (dc, ac < 400 Hz), measurement inhibited for higher values V ext rejection > 120 dB (162⁄3, 50, 60, 400 Hz) Measuring time Typical 6 sec. Max. overload 250 V rms (pertains to misuse) Auxiliary power 6 x 1.5 V alkaline (type AA LR6) Battery life span Typical > 3,000 measurements Dimensions (WxHxD) 250 mm x 133 mm x 187 mm (9.75 in x 5.25 in x 7.35 in) Weight 1.1 kg (2.43 lb) including batteries 7.6 kg (16.8 lb) including accessories and batteries in carrying case RA 3-pole ground resistance measurement (IEC 1557-5) Switch position Resolution Measuring range Accuracy Operating error RA 3-pole 0.001 Ω to 10 Ω 0.020 Ω to 19.99 kΩ ± (2 % rdg + 3 d) ± (5 % rdg + 3 d) Measuring principle: Current and voltage measurement Measuring voltage Vm = 48 V ac Short-circuit current > 50 mA Measure frequency 128 Hz Probe resistance (RS) Max 100 kΩ Auxiliary earth electrode resistance (RH) Max. 100 kΩ Additional error from RH and RS RH[kΩ]•••RS[kΩ]/RA[Ω]•••0.2 % Monitoring of RS and RH with error indicator Automatic range selection Measurement is not performed if the current through the current clamp is too low RA 4-pole ground resistance measurement (IEC 1557-5) Switch position Resolution Measuring range Accuracy Operating error RA 4-pole 0.001 Ω to 10 Ω 0.020 Ω to 19.99 kΩ ± (2 % rdg + 3 d) ± (5 % rdg + 3 d) Measuring principle: Current/voltage measurement Measuring voltage Vm = 48 V ac Short-circuit current > 50 mA Measuring frequency 128 Hz Probe resistance (RS+ RES) Max. 100 kΩ Auxiliary earth electrode resistance (RH) Max. 100 kΩ Additional error from RH and RS RH[kΩ]•••RS[kΩ/RA[Ω]•••0.2 % Monitoring of RS, and RH with error indicator Automatic range selection RA 3-pole selective ground resistance measurement with current clamp (RA) Switch position Resolution Measuring range Accuracy Operating error RA 3-pole 0.001 Ω to 10 Ω 0.020 Ω to 19.99 kΩ ± (7 % rdg + 3 d) ± (10 % rdg + 5 d) Measuring principle: Current/voltage measurement (with external current clamp) Measuring voltage Vm = 48 V ac Short-circuit current > 50 mA Measuring frequency 128 Hz Probe resistance (RS) Max. 100 kΩ Auxiliary earth electrode resistance (RH) Max. 100 kΩ Monitoring of RS, and RH with error indicator Automatic range selection Measurement is not performed if the current through the current clamp is too low RA 4-pole selective ground resistance measurement with current clamp (RA) Switch position Resolution Measuring range Accuracy Operating error RA 4-pole 0.001 Ω to 10 Ω 0.020 Ω to 19.99 kΩ ± (7 % rdg + 3 d) ± (10 % rdg + 5 d) Measuring principle: Current/voltage measurement (with external current clamp) Measuring voltage Vm = 48 V ac Short-circuit current > 50 mA Measuring frequency 128 Hz Probe resistance (RS) Max. 100 kΩ Auxiliary earth electrode resistance (RH) Max. 100 kΩ Monitoring of RS, and RH with error indicator Automatic range selection Measurement is not performed if the current through the current clamp is too low Stakeless ground loop measurement Switch position Resolution Measuring range Accuracy Operating error RA 4-pole 0.001 Ω to 0.1 Ω 0.020 Ω to 199.9 Ω ± (7 % rdg + 3 d) ± (10 % rdg + 5 d) Measuring principle: Stakeless measurement of resistance in closed loops using two current transformers Measuring voltage Vm = 48 V ac (primary) Measuring frequency 128 Hz Noise current (IEXT) Max. IEXT = 10 A (ac) (RA < 20 Ω)Max. IEXT = 2 A (ac) (RA > 20 Ω) Please check our Huge Inventory with savings of up to 80% off of retail on Cat5/5e/6 LAN Cable Certifiers and Fiber Optic OTDR's, Fusion Splicers, CATV Meters, Fiber Optic Kits, Sources, Meters, Tools, Network Analyzers and much more. Here is a Link to our Ebay Test Equipment Store. All of our Test Equipment is backed with a Full Warranty and unbeatable customer support & service. Please don't hesitate to contact us for a Quote on Something you don't see in our inventory, sometimes we have items that may have not been listed or processed yet. Test Equipment Store Offers a wide range of Refurbished Telecom/ Datacom Tools and Test Measurement Equipment. Which includes Fiber Optic Test and Splicing tools, Fusion Splicers, OTDRs, Copper and Fiber Cable Certifiers, CATV Test Equipment, Cable and Antenna Analyzers, Network Analyzers and much more! We carry a large inventory of quality refurbished and used test equipment from all the major manufacturers. If you are looking for multiple quantities or if we don't have a listing for a particular item that you are looking for. Please contact us as it may be fresh inventory waiting to be listed or we'll be glad to find it for you at the best price possible and put up an eBay listing for you! We Ship World Wide! We will attempt to ship your item(s) within 24 hours after payment has been received. To get a real-time shipping quote to your destination, enter your country and zip / postal code information into the shipping calculator and click "Get Rate".Many countries impose their own customs, duties, tariffs, taxes, etc. on items being shipped from a foreign country. We do not cover those cost's and we recommend that you contact your countries customs agency for that information.We Offer Multiple Quantity Price & Shipping Discounts, Email Us If You Are Interested In Larger Quantities. We accept credit card payment transactions via the online checkout system! The checkout process is designed so that it communicates with the merchant to confirm that payment has been made and cleared. Other methods of payment are outlined through the online checkout process. Winning bidders must contact us within 3 days after auction close if special payment arrangements are needed. Your payment is expected within 5 days after the auction close. Unpaid auctions will be forfeited after 5 days of the auction close and the Item(s) will be relisted for sale. Items will be shipped within 24 hours (1 Business Day) upon receipt of payment from the winning bidder. (Certain orders may take longer for processing due to comprehensive final service inspections) A Shipment Tracking number(s) will be provided to inform Buyers of their expected ETA (Estimated Time of Arrival). Tracking number(s) will be provided the same day as order shipment. Thank you ALL MAJOR CREDIT CARDS & PayPal ACCEPTED Sell Smarter with Kyozou.Inventory and Ecommerce Management
Price: 3169 USD
Location: Southgate, Michigan
End Time: 2025-01-18T14:22:17.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money back or replacement (buyer's choice)
Brand: Fluke
MPN: 1623-2
Type: Earth Ground Resistance Meter