Ground Rod 3/8''X4' Grounding Stake Bonded Electrical Fence Grounding Bar for S

Description: High-quality product technologyRolled cone driving pointOur machine rolled cone driving point better than hammered flat point. when driving to ground, the stability is better and will not easily go to wrong direction.Heavy-duty hex head screw boltsWe use heavy-duty hex head screw bolts for stronger ground wire fastening,better than thinner screw bolts.Fully copper platedThe integrated fully copper plated clamp with copper plating on interior thread for better corrosion resistance.Off-Air Antenna InstallationsOur ground rod are widely used for Off-Air Antenna Installations.Satellite Dish InstallationsOur ground rod are widely used for Satellite Dish Installations.Electric FencingOur ground rod are widely used for Electric Fencing in farms and ranches.Household diesel generatorOur ground rod are widely used for Household diesel generators.4’ Copperbond Ground Rods with Preinstalled Convenient ClampSandy or rocky soils are not as conductive as loamy soils, so systems installed on these types of soils may need to be an earth return type of grounding system. An earth return system is one in which alternate wires in the fence are utilized as ground wires. Charged wires on a system need to be connected back to the output connector on the energizer and earth ground non-charged wires need to be either connected back to the ground terminal on the charger, or connected to ground rods in the fence lines.TO INSTALL A 2-ROD ENHANCED GROUND KIT AT SIMILAR EXPENDITURE OF ONE GROUND RODImportance to Install More Ground RodsAn energizer must be properly grounded to realize its full potential. The larger the output of a charger, the more grounding rods will be needed. A general rule is to install a minimum of 3 feet of ground rod per joule of output capacity.A 15 joule fence charger will require a minimum of 45 feet of ground rod. These rods must be installed at least 10 feet apart from each other. The lower and wetter the ground they are installed in the better their performance will be. Most grounding rods are made from galvanized steel or copper and it is important that the type of wire used to connect the energizer to the ground rod be identical to the rod. Doing so will help to minimize the reduction of performance from electrolysis.Product SpecificationsRod Diameter3/8 inchRod Length4 feetFinishCopper electroplatingSingle Rod Weight1.65 PoundsStandard & TestsASTM E8/E8M-16ae1 ； ASTM B368-2014

Price: 25.99 USD

Location: Naga City, default

End Time: 2025-02-08T02:18:58.000Z

Shipping Cost: 0 USD